Burwood Waste Management Conditions

• Noise and vibration control; • Dust and odour suppression and control; • Storm water control and discharge; • Erosion control; • Waste storage and recycling control; • Litter control • Construction material storage; • Truck cleaning methods on site so as to prevent spread of soil and like materials onto Council’s roadways; and • Community Information program, communication procedures and feedback hotline. • Framed panels or doors enclosing or partially enclosing a shower or bath shall be glazed with "A" or "B" grade safety glazing material in accordance with Australian Standard AS 1288-2006, Table 4.5 SAA Glass Installation Code (Human Impact Considerations) and B1.4 of the Building Code…

61. Utility Services Before Construction – apply early as building of water and sewer services can be time consuming or may impact on other parts of your development. Section 73 Compliance Certificate A compliance certificate must be obtained from Sydney Water, under Section 73 of the Sydney Water Act 1994. Our assessment will determine the availability of water and wastewater services, which may require extension, adjustment or connection to our mains. Make early application for the certificate, as there may be assets to be built and this can take some time. A Section 73 Compliance Certificate must be obtained before an occupation or subdivision certificate will be issued. Applications can…

89. Upon disposal of any waste, the applicant is to compile and provide records of the disposal to the principal certifier, detailing the following: • The contact details of the person(s) who removed the waste • The waste carrier vehicle registration • The date and time of waste collection • A description of the waste (type of waste and estimated quantity) and whether the waste is expected to be reused, recycled or go to landfill • The address of the disposal location(s) where the waste was taken 17 18 • The corresponding tip docket/receipt from the site(s) to which the waste is transferred, noting date and time of delivery, description (type and quantity) of waste. Note: If waste has been…

49. Upon disposal of any waste, the applicant is to compile and provide records of the disposal to the principal certifier, detailing the following: a. The contact details of the person(s) who removed the waste b. The waste carrier vehicle registration c. The date and time of waste collection d. A description of the waste (type of waste and estimated quantity) and whether the waste is expected to be reused, recycled or go to landfill e. The address of the disposal location(s) where the waste was taken f. The corresponding tip docket/receipt from the site(s) to which the waste is transferred, noting date and time of delivery, description (type and quantity) of waste. Note: If waste has been…

192. Both residential and commercial garbage and recycling storage areas are to be: a. Supplied with both hot and cold water; b. Paved with impervious floor materials; c. Coved at the intersection of the floor and the walls; d. Graded and drained to a floor waste which is connected to the sewer in accordance with the requirements of Sydney Water; e. Adequately ventilated (mechanically or naturally) so that odour emissions do not cause offensive odour as defined by the Protection of the Environment Operations Act 1997; f. Fitted with appropriate interventions to meet fire safety standards in accordance with the Building Code of Australia. g. Suitable signage is to be installed in each waste…

96. Both residential and commercial garbage and recycling storage areas are to be: a. Supplied with both hot and cold water; b. Paved with impervious floor materials; c. Coved at the intersection of the floor and the walls; d. Graded and drained to a floor waste which is connected to the sewer in accordance with the requirements of Sydney Water; e. Adequately ventilated (mechanically or naturally) so that odour emissions do not cause offensive odour as defined by the Protection of the Environment Operations Act 1997; f. Fitted with appropriate interventions to meet fire safety standards in accordance with the Building Code of Australia. g. Suitable signage is to be installed in each waste…

135. Garbage and recycling storage areas are to be: a. Supplied with both hot and cold water; b. Paved with impervious floor materials; c. Coved at the intersection of the floor and the walls; d. Graded and drained to a floor waste which is connected to the sewer in accordance with the requirements of Sydney Water; e. Adequately ventilated (mechanically or naturally) so that odour emissions do not cause offensive odour as defined by the Protection of the Environment Operations Act 1997; f. Fitted with appropriate interventions to meet fire safety standards in accordance with the Building Code of Australia; and g. Separate bins are to be provided to ensure the separation of recyclables from…

65. Prior to the issue of an Occupation Certificate, the applicant is to arrange with Council’s Waste and Cleansing Team the issue of the appropriate number of bins for the residential portion of the development and payment of the necessary fees to enable commencement of the waste and recycling services. Alternative collection methods that achieve best outcomes for ongoing waste management (such as waste compactors and hook lift vehicle collection) are to be assessed where possible within building clearances.

79. All garbage and recycling material shall be stored in a designated garbage area, which includes provision for the storage of all putrescible waste and recyclable material emanating from the premises. Adequate natural or mechanical ventilation is required where bins are stored in an enclosed area and meet fire safety standards in accordance with the Building Code of Australia

105. The owner/occupier of the premises is to enter an agreement with registered waste company or provider for the regular collection of all commercial waste and recyclable material generated from the premises. A copy of the agreement is to be retained on site and produced to an authorised Council officer upon request. ENGINEERING - GENERAL

32. All loading and unloading operations associated with servicing the site must be carried out within the confines of the site, at all times and must not obstruct other properties/units or the public way. Entry and exit for vehicles using the loading dock must be in a forward direction. This does not apply to waste collection vehicles.

104. Prior to the issue of an Occupation Certificate, the applicant is to arrange with Council’s Environment and Health Section the issue of the appropriate number of garbage and re- cycling bins for the residential portion of the development and payment of the necessary fees to enable commencement of the waste and recycling services.

74. Prior to the issue of an Occupation Certificate, the applicant is to arrange with Council’s Environment and Health Section the issue of the appropriate number of garbage and re-cycling bins for the residential portion of the development and payment of the necessary fees to enable commencement of the waste and recycling services.

75. The owner/occupier of the premises is to enter an agreement with registered waste company or provider for the regular collection of all commercial waste and recyclable material generated from the premises. A copy of the agreement is to be retained on site and produced to an authorized Council officer upon request. ENGINEERING

81. The occupier of the premises is to enter an agreement with registered waste company or provider for the regular collection of all waste and recyclable material generated from the premises. A copy of the agreement is to be retained on site and produced to an authorized Council officer if requested. ENGINEERING – GENERAL

139. The owner/occupier of the premises is to enter an agreement with registered waste company or provider for the regular collection of all commercial waste and recyclable material generated from the site. A copy of the agreement is to be retained on site and produced to an authorized Council officer upon request. 

53. Waste collection staff will enter the Waste Storage Area, wheel bins to the collection vehicle, and then return empty bins to the Waste Storage Area. All bins for collection must be presented in the Waste Storage Area and arranged neatly by the building manager for ease of access.

136. Waste and recycling bins shall be kept in a clean and hygienic condition. Bins must not be overloaded and lids must always be closed. Bins are to be washed regularly within the garbage storage room with any waste water being discharged to the sewer by way of the grated drain.

102. Spoil and building materials shall not be placed, stored, thrown or caused to fall on any public roadway or footpath. Waste containers shall be placed in accordance with Council's Rubbish Skips Policy. Contact Council for a list of approved skip bin suppliers.

120. Spoil and building materials shall not be placed, stored, thrown or caused to fall on any public roadway or footpath. Waste containers shall be placed in accordance with Council's Rubbish Skips Policy. Contact Council for a list of approved skip bin suppliers.

108. Spoil and building materials shall not be placed, stored, thrown or caused to fall on any public roadway or footpath. Waste containers shall be placed in accordance with Council's Rubbish Skips Policy. Contact Council for a list of approved skip bin suppliers.

84. Spoil and building materials shall not be placed, stored, thrown or caused to fall on any public roadway or footpath. Waste containers shall be placed in accordance with Council's Rubbish Skips Policy. Contact Council for a list of approved skip bin suppliers.

78. Spoil and building materials shall not be placed, stored, thrown or caused to fall on any public roadway or footpath. Waste containers shall be placed in accordance with Council's Rubbish Skips Policy. Contact Council for a list of approved skip bin suppliers.

140. Bins shall be placed within the publicly access areas of the Urban Park at appropriate locations and in accordance with the recommendations made in the Operational Waste Management Plan prepared by Elephants Foot dated 30 May 2022. AUSGRID REQUIREMENTS

93. A waste cupboard or other storage area is to be provided within each dwelling which is of sufficient size to hold a single day's waste and to enable source separation of general waste, recyclables and compostable materials.

56. A waste cupboard or other storage area is to be provided within each dwelling which is of sufficient size to hold a single day's waste and to enable source separation of general waste, recyclables and compostable materials.

70. Waste and recycling bins shall be kept in a clean and hygienic condition. Bins are to be washed regularly within the garbage storage room with any waste water being discharged to the sewer by way of the grated drain 9

80. Waste and recycling bins shall be kept in a clean and hygienic condition. Bins are to be washed regularly within the garbage storage room with any waste water being discharged to the sewer by way of the grated drain.

194. Waste and recycling bins shall be kept in a clean and hygienic condition. Bins are to be washed regularly within the garbage storage room with any waste water being discharged to the sewer by way of the grated drain

100. Waste and recycling bins shall be kept in a clean and hygienic condition. Bins are to be washed regularly within the garbage storage room with any waste water being discharged to the sewer by way of the grated drain

52. Waste collection will be provided by a Heavy Rigid Vehicle. The collection vehicle may reverse onto or off of the property in order to park at the designated collection area on the driveway apron. 8

50. All operational and ongoing waste management is to be conducted in accordance with the approved Waste Management Plan, except where amended by any other conditions of this consent.

189. All waste collection vehicle approaches are to provide for a minimum clearance height of 3.6m, including clearance of all roller door equipment, fittings and pipes

91. All waste collection vehicle approaches are to provide for a minimum clearance height of 3.5m, including clearance of all roller door equipment, fittings and pipes.

55. All waste collection vehicle approaches are to provide for a minimum clearance height of 3.6m, including clearance of all roller door equipment, fittings and pipes.

191. Suitable signage is to be installed in each level of the chute waste service rooms encouraging the separation of recyclables from the general waste stream.

95. Suitable signage is to be installed in each level of the chute waste service rooms encouraging the separation of recyclables from the general waste stream.

99. A Caretaker is to be appointed for the development who will have ongoing responsibility for the proper management of the waste and recycling services 18 19

58. Suitable signage is to be installed in each level of the chute waste service rooms encouraging the separation of recyclables from the general waste stream.

138. Waste and recycling collections are to be carried out in a manner and at times which do not cause a noise nuisance to the immediate or nearby residents.

193. A Caretaker is to be appointed for the development who will have ongoing responsibility for the proper management of the waste and recycling services

69. A Caretaker is to be appointed for the development who will have ongoing responsibility for the proper management of the waste and recycling services

66. Suitable signage is to be installed in each waste service room encouraging the separation of recyclables from the general waste stream.

137. Access pathways for manual wheeling bins between storage areas and the collection vehicle parking location must be free of steps.

195. Access pathways for manual wheeling bins between storage areas and the collection vehicle parking location must be free of steps

101. Access pathways for manual wheeling bins between storage areas and the collection vehicle parking location must be free of steps

54. Access pathways for manual wheeling bins between storage areas and the collection vehicle parking location must be free of steps.

71. Access pathways for manual wheeling bins between storage areas and the collection vehicle parking location must be free of steps

197. Commercial tenants must be discouraged (through signage and other means) from using the residential waste and recycling bins.

103. Commercial tenants must be discouraged (through signage and other means) from using the residential waste and recycling bins.

73. Commercial tenants must be discouraged (through signage and other means) from using the residential waste and recycling bins.

188. All operational and ongoing waste management is to be conducted in accordance with the approved Waste Management Plan

90. All operational and ongoing waste management is to be conducted in accordance with the approved Waste Management Plan

196. There must be separate waste/recycling storage areas/rooms for the residential and commercial waste.

102. There must be separate waste/recycling storage areas/rooms for the residential and commercial waste.

72. There must be separate waste/recycling storage areas/rooms for the residential and commercial waste.

59. Both residential and commercial garbage and recycling storage areas are to be:

51. Waste collection will be undertaken by Council or its appointed contractor.