Bayside Parking Conditions

119. Car Share NOW CONDITION 124 The eight (8) car share parking spaces The eight (8) car share parking it is not feasible to have Partially agreed, can be changed to be must be operated by a recognized spaces must be operated by a the car share prior to the issue of any occupation commercial car share operator within the recognized commercial car operational whilst the certificate for the residential apartment site. A contract for the operation of the share operator within the site. A development is only component of the development. car share space by the commercial car contract for the operation of the partly occupied. share provider must be entered into prior car share space by the to…

1. New or modified connection To apply to connect or modify a connection for a residential or commercial premises, Ausgrid recommends the proponent engage an Accredited Service Provider and submit a connection application to Ausgrid as soon as practicable. Visit the Ausgrid website for further details; https://www.ausgrid.com.au/Connections/Get-connected Additional information can be found in the Ausgrid Quick Reference Guide for Safety Clearances “Working Near Ausgrid Assets – Clearances”. This document can be found by visiting the following Ausgrid website: www.ausgrid.com.au/Your-safety/Working- safe/Clearance-enquiries Condition reason: To ensure compliance with requirements of Ausgrid.…

1. Compliance with AS2890 Car, (including parking Bicycle and Motorcycle Parking: spaces, ramps, aisles, a. The parking facility vehicular crossing etc.) (including parking spaces, must comply in full with ramps, aisles, vehicular the current crossing etc.) must comply AS2890.1:2004 The in full with AS2890.1. The longitudinal profile(s) of longitudinal profile(s) of the the access driveway access driveway and any and any ramps within ramps within the parking the parking facilities facilities must comply with must comply with the the Ground Clearance, Ground Clearance, Gradient (%) and Length Gradient (%) and requirements of the 2890 Length requirements of Australian Standards the 2890…

13. Safer by Design To maximise security in and around the development the following shall be incorporated into the development in accordance with the recommendations from the NSW Police dated 11 May 2021, in accordance with the submitted CPTED Report. Details for the following are to be approved by the Certifier prior to the issue of the Construction Certificate, implemented prior to issue of the Occupation Certificate, and maintained for the lifetime of the development. (a) Adopt and implement recommendations contained within the Crime Prevention Through Environmental Design (CPTED) Report prepared byH arris Crime Prevention Services dated 2 December 2020. (b) Monitored CCTV facilities…

141. Car Share The five (5) car share parking spaces must be operated by a recognized commercial car share operator within the site. A contract for the operation of the car share space by the commercial car share provider must be entered into prior to issue of any Occupation Certificate. The car share space must be made available to car share operators without a fee or charge. The car share space must be appropriately line marked and signposted to indicate its usage to be exclusively as a car share space to the satisfaction of the car share operator. The car share space must be publicly accessible at all times and the intercom system must be designed to facilitate public access to the car…

75. Safer by Design Requirements To maximise security in and around the development the following shall be incorporated into the development. Details for the following are to be approved by the Principal Certifier prior to the issue of the Construction Certificate, implemented prior to issue of the Occupation Certificate, and maintained for the lifetime of the development: h) Monitored CCTV facilities shall be implemented throughout the development. Areas of focus include the basement car park (including entry and exits), main entry areas to the development and garbage/storage areas, and i) A lighting maintenance policy shall be established for the development. Lighting shall be designed to…

57. Safer by Design Requirements To maximise security in and around the development the following shall be incorporated into the development. Details for the following are to be approved by the Principal Certifier prior to the issue of the relevant Construction Certificate, implemented prior to issue of the relevant Occupation Certificate, and maintained for the lifetime of the development: a) Monitored CCTV facilities shall be implemented throughout the development. Areas of focus include the basement car park (including entry and exits), main entry areas to the development and garbage/storage areas, and b) A lighting maintenance policy shall be established for the development. Lighting…

10. Key Operational Requirements The facility shall operate in accordance with the following key operational requirements: (a) The facility shall only be used as a Residential Care Facility as defined in State Environmental Planning Policy (Housing for Seniors or People with a Disability) 2004. No alternate use of the building is permitted without the prior consent of the Council. (b) The maximum number of beds within the facility is limited to 128 115 and the maximum number of rooms within the facility shall be limited to 112. (c) The cafe shall be available for use by residents, staff and their guests only.T he cafe is not to be open to the general public. (d) Any signage must not use:…

37. Design Amendments Before the issue of the relevant Construction Certificate, the Principal Certifier must ensure the approved Construction Certificate plans and specifications detail the following required amendments to the approved plans and documents: a) The four visitor car parking spaces on basement 1 are to be relocated to the ground floor level of the development by making the following amendments: i) Providing a visitor space adjacent to service bay 4 by shifting the column location to be closer to car share 1. ii) Relocating the 3 visitor bicycle spaces to the lobby frontage and shifting service bay 2 & 3 so that a visitor carparking space can be provided where the visitor…

120. Parking Facility Certification NOW CONDITION 120 Prior to the issue of the Occupation Prior to the issue of the Not related to Not agreed, this condition is associated Certificate, a Civil Engineer registered relevant Occupation Certificate, basement works. with an Occupation Certificate. with the National Engineering Register a Civil Engineer registered with (NER) shall certify that the vehicular the National Engineering access and off-street parking facilities Register (NER) shall certify that have been constructed & line marked in the vehicular access and off- accordance with the approved street parking facilities have construction plans and the applicable been constructed & line…

108. Provision of Intercom system NOW CONDITION 113 Prior to the issue of the Occupation Prior to the issue of the Not related to Agreed, amendment will be made. Certificate, the entry to the car park and relevant Occupation Certificate, basement works. each pedestrian entry at the ground floor the entry to the car park and Provision of intercom is level of the building shall be provided with each pedestrian entry at the relevant to the above an intercom system. ground floor level of the building ground works. shall be provided with an The intercom system shall be connected intercom system. to each dwelling unit / tenancy and enable those units / tenancies to provide access The intercom…

156. Parking and Shared Private Access Road 291 off-street car parking spaces (including 268 residential parking spaces, 12 residential visitor parking spaces, 5 car share spaces, 4 residential service (van) spaces and 2 dedicated car wash bays) shall be provided and line marked to the satisfaction of a qualified Civil Engineer. The entirety of the new access road that permits vehicular access to the development from the public road network (shared with Lot C) is to be constructed as a whole and be constructed to the satisfaction of the Bayside Council Director of City Futures (or delegate) prior to the issue of the whole of building Occupation Certificate. REASON To ensure compliance with…

146. Private Waste Collection Waste and recycling must be collected by a private waste contractor within the site. A contract for waste and recycling collection must be entered into prior to issue of the Occupation Certificate and the maximum size of the waste collection vehicle shall be equal to or smaller than a MRV vehicle (as denoted by AS2890.2). The company engaged must ensure that all recycling is collected separately from waste. Council must be advised in writing within seven (7) days of a private contractor being engaged for waste collection services. Alternatively Bayside Council can be requested to collect the residential waste within the building. REASON To ensure the waste can…

154. EV Charging Points - Installation & Certification Prior to the issue of the whole of building Occupation Certificate, the required electric vehicle (EV) charging systems, including all associated electrical and control systems (as required by conditions of this consent), shall be tested, inspected, and certified by a suitably qualified and experienced person. This certification, including evidence of installation and testing of all electric charging systems, is to be provided to the satisfaction of Bayside Council and the Principal Certifier prior to the issue of the whole of building Occupation Certificate. REASON To ensure installation of the EV charging facilities. Bayside Council…

78. Private Waste Collection Waste and recycling must be collected by a private waste contractor within the site. A contract for waste and recycling collection must be entered into prior to issue of the Occupation Certificate and the maximum size of the waste collection vehicle shall be equal to or smaller than a MRV vehicle (as denoted by AS2890.2). The company engaged must ensure that all recycling is collected separately from waste. Council must be advised in writing within seven (7) days of a private contractor being engaged for waste collection services MDA-2025/27 Page 38 of 49

76. Car Parking Details Before the issue of the relevant Construction Certificate, written evidence prepared by a suitably qualified Engineer must be obtained that demonstrates, to the Certifier satisfaction, the plans for parking facilities comply with the relevant parts of AS 2890.1 Parking Facilities – Off-Street Carparking and Council’s relevant development control plan (in force as at the date of the determination of this consent). REASON To ensure parking facilities are designed in accordance with the Australian Standard and Council’s DCP.

1. The swept path of Councils garbage truck requires the landscaping in the car park to be adjusted to ensure no conflict with the movements of the waste truck. Detailed plans of the works required to the planter bed to reduce its size to facilitate the swept paths must be submitted to the Principal Certifier for approval. These works must be undertaken as part of the development. Condition reason: To require minor amendments to the plans endorsed by the consent authority following assessment of the development.

153. Electric Bicycle Charging Facilities Prior to the issue of the whole of building Occupation Certificate, all bicycle parking areas are to be provided with electrical outlets at a rate of 1 power point per 20 bicycle spaces. Evidence of compliance is to be submitted to the Principal Certifier. REASON To ensure installation of the bicycle facilities.

15. Carrying out of works wholly within the Site Bayside Council Page 8 of 87 DA-2024/169 All approved works shall be carried out inside the confines of the site boundary and not in adjacent forecourts, yards, access ways, car parking areas, or on Council’s footpath. REASON To avoid encroachment of the development beyond the site boundaries.

6. Parking spaces must not be enclosed without further approval of Bayside Council. The enclosure of car spaces is not permitted unless the enclosure complies with the design requirements of AS/NZS 2890.1. DA-2024/268 66